Design registered: Registration No. 1762013

Size : Suitable for both left and right	D ( Maximum Diameter)	Wire Diameter	NUT Hex
2″	65 mm	M5	17
2½”	78 mm	M6	17
3″	90 mm	M6	17
4″	115 mm	M6	17
5″	145 mm	M6	17
6″	170 mm	M6	17
8″	223 mm	M8	17

Material: SS400
trivalent chrome-plated

● Suitable for both left- and right-hand coiled hoses.
● Fits snugly into the grooves and tightens securely.
● The band can be added or replaced even after the hose connector has been inserted.
● Can also be used on hoses with a smooth surface.

Note
: The shape of the upper and lower wires ensures a secure fit. When fitting using power tools, please take care not to overtighten, as this may cause the wires in the clamp body to snap or the hose braiding (reinforcing threads) to break.

Operation: Fits securely onto the end of the hose clamp, so it will not slip off easily
. Please be sure to use this to prevent accidents.
Applications: End covers
for all types of hose clamps, including those used on ships, vehicles, in military and construction applications, and for domestic use. Sizes: 2 sizes (9 mm wide and 13 mm wide) (RoHS 2 compliant)
Material: EPDM
Heat resistance: Approx. -53°C to approx. 148°C

*Please use P-caps to prevent cuts to the hands from the sharp edges of hose clamp hoops.

Size	A	B	C
M4	3.5 mm	15±2	0.8 mm
M5	4.5 mm	15±2	1 mm
M6	5.5 mm	15±2	1 mm
M8	7.5 mm	15±2	1 mm
M10	9.5 mm	20±2	1 mm
M12	11.5 mm	20 ± 2	1 mm

Material: Soft PVC; each size
: 10 pieces per pack

● Fit onto the screw after tightening the hose clamp.
● Fitting this prevents injuries and accidents caused by contact.
● Made from soft PVC, it fits snugly onto the screw.

Caution
: After fitting the hose clamp, please fit the S-cap to prevent injury from the tip of the screw. Please use this to ensure the safety of workers.